Metallurgical Hydraulic Cylinder

The hydraulic cylinder for metallurgical equipment is a double-acting piston cylinder, the cylinder diameter is generally within the range of 40~320mm, and the working pressure is &lt. =16MPA, the hydraulic oil mechanical system can be used to lose emulsion and other working media, its installation methods have flange, earrings, pins, tripods (base) and other types.

Technical parameters:

Working pressure 6.3/16/25Mpa, cylinder diameter 40~320mm, rod diameter 22~220mm,

Maximum travel < 2000mm, ambient temperature -40 ° C to +120 ° C

Comply with ISO6021/1-1981 standard

Scope of application of metallurgical hydraulic cylinder:

The hydraulic cylinder for metallurgical equipment is a double-acting piston cylinder, the cylinder diameter is generally within the range of 40~320mm, and the working pressure is &lt. =16MPA, its basic parameters, including cylinder diameter, rod diameter, stroke, oil port size.

Metallurgical hydraulic cylinder oil port connection method:

Metallurgical hydraulic cylinder piston rod end connection method:

Characteristic data of metallurgical hydraulic cylinder:

Composition of metallurgical hydraulic cylinder accessories:

Metallurgical hydraulic cylinder 100% oil test:

The oil test is carried out on the test bench. The implementation steps are as follows: the oil pipe of the test bench is connected to the oil inlet and outlet of the oil cylinder, the pressure is put on the test bench, the oil of the test bench enters the oil cylinder, and the oil cylinder is reversed through the solenoid valve, so that the oil cylinder can go back and forth several times, and the gap between the rod end of the cylinder, the cylinder cylinder and the front and back cover is observed whether there is oil leakage.

Metallurgical hydraulic cylinder painting:

Actual photo of metallurgical hydraulic cylinder: